Mounting The Seat - KTM 450 SX ATV 2009 Setup Instructions

WORK

Mounting the seat

3.3
Removing the rear fender
3.4
–
Hook slot

seat and slide tab
100046-10
–
Push down the rear of the seat until release hook
–
Make sure that the seat is correctly locked in.
100043-10
–
Remove the seat (
–
Remove screws
300254-10
–
Raise the rear of the air filter box lid
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Raise fender
300255-10
on the seat into collar sleeve
under fuel tank .
 
p. 4)
.

. At the same time, use your other hand to

at the rear and remove it.

of the fuel tank, lower the rear of the

engages.

5