Optional Bluewave® Spa Stereo System - Jacuzzi j-300 Installation, Use & Maintenance Manual

Should checking the above steps fail to correct the problem,
please call your Jacuzzi Hot Tub dealer so that they may arrange
service.
Optional BLUEWAVE® Spa Stereo System
To start enjoying your new stereo receiver, please read the following
operation instructions in their entirety.
WARNING: RISK OF ELECTRICAL SHOCK HAZARD EX-
ISTS AND EQUIPMENT DAMAGE!
Pairing the Remote and Stereo
In order for the remote to operate the stereo, you
need to pair them using the following method:
- Make sure the stereo is ON.
- Press the ON button on the remote control to turn it on (keep
the remote control near the stereo).
- Press and hold the "Mode" button on the remote control until
you see "Pairing in progress".
- If the pairing sequence is successful, you will see "Paired" ap-
pear on the LCD on the remote control; if you see "Retry again",
repeat the above procedure.
Audio Settings
The Audio button, provides access to many of the stereo's set-
tings. By continually pressing the Audio button you can scroll
and adjust the following functions: Balance-BASs-TREble-Rock-
Classic-Pop (respectively).
To adjust the settings:
1 - press the Audio button to access the menu;
2 - press the same button again to scroll through the available
options;
3 - use the + or – buttons to adjust the settings;
4 - press and hold the Audio button to save the new settings and
exit the Audio menu.
Bass Setting
Press the Audio button until you see "BASS" on the LCD display.
Press the + button to adjust the setting up to a maximum of +5.
Press the – button to adjust the setting down to -5.
Treble Setting:
Press the Audio button until you see "TREBLE" on the LCD display.
Press the + button to adjust the setting up to a maximum of +5.
Press the – button to reduce the setting down to -5.
Balance Setting
Press the Audio button until you see "BALANCE" on the LCD dis-
play. Press the + or – button to adjust the setting.
Wireless Remote Control Functions
A remote control is supplied on all spas with the optional audio
system.
The supplied remote control provides no control over external
Auxiliary player operation except for volume control and source
selection. The Auxiliary player performs all external Auxiliary
playback operations.
Power Button: Press once to turn remote "ON" ; press a sec-
ond time to place the stereo in "Standby" mode.
Audio Button: Allows access to most of the stereo sound func-
tions. Press continuously to scroll through the following settings
(if applicable): Balance-Bass-Treble-Rock-Classic.
Mode/pair Button: Press to switch between "AUX" and Blue-
tooth® (BT) modes. "BT AUDIO" appears when a Bluetooth device
is paired with the stereo.
Volume Up Button: Used to increase volume between 0 to
20.
Volume Down Button: Used to decrease volume between
20 to 0.
Aux: Press to pause track, press again to resume playing.
Bluetooth®: Press to mute sound, press again to reactivate
sound.
Aux: Not used.
Bluetooth®:Press the button to go back through the tracks.
Aux: Not used.
Bluetooth®: Press the button to go forward through the tracks.
1
Press this button to select the "Pop" equalisation.
2
Press this button to select the "Classic" equalisation.
3
Press this button to select the "Rock" equalisation.
Not used.
VBass: Press this button to switch the bass boost function on/off.
46
2
1 3
MODE
PAIR
V
AUDIO BASS