External Lights (Optional); Smarttub™ System (Optional) - Jacuzzi j-300 Installation, Use & Maintenance Manual

Air Controls
Certain jet systems have their own "toggle" on/off air control.
Each control introduces air into the water lines that supply spe-
cific jet groups. Simply press any air control button Jacuzzi logo
side down to open or press the opposite side of button to close.
Note: To minimize heat loss, close all air controls (Jacuzzi logo
down) when spa is not in use. Some jets may suck air even when
closed.
Optional BLUEWAVE® Spa Stereo System
Spas equipped with the optional audio system offer enhanced
enjoyment. These models include a high-quality Bluetooth® ste-
reo receiver with four high-quality marine speakers for unsur-
passed sound quality and long-life.
Blow-Out Cycle
This cycle will purge the air from the plumbing lines normally
caused by draining and filling the spa. The Jets Pump 1 and the
Circulation Pump will turn on for 1 minute and then shut off.
Then Jets Pump 2 will turn on and run for 1 minute then shut off.
This cycle will only occur at start up.
Note: Turning off the corresponding jets pump that is running can
deactivate the feature.
Clean-up Cycle
The cleanup cycle occurs once per day at 12:00 PM (noon) for 2
minutes. This is not user programmable. The Jets Pump 1 and the
Circulation Pump will turn on for one minute and then shut off.
Then Jets Pump 2 will turn on and run for 1 minute then shut off.
Note: Turning off the corresponding jets pump that is running can
deactivate the feature.

External lights (optional)

The external lights on the hot tub light up the area around it.
These lights can be activated from the "Lights" menu (the only
available colour is white). Once active, they remain on for 8
hours (they can be turned off as desired).
Note: the external lights are only available for models with
ProFinish panels.
SmartTub™ system (optional)
This control system allows you to check the operating status of
your hot tub on your mobile device, making it easier to manage
and maintain. Any messages relating to possible hot tub malfun-
ctions will be shown on the screen on your device.
Note: the service is free for the first year; at the end of that period, if
you want to continue to use the functions of the SmartTub™ system,
you must renew your subscription (for further information, refer to
the terms and conditions of use by clicking on the relative links in
the app).
Note on the processing of personal data: the creation of
an account and relative registration of the hot tub (necessary to
use the SmartTub™ system) entails Jacuzzi collecting some data,
such as the serial number of the product, the name, surname and
address of the person registering the hot tub, and also their email
address. If any online purchases are made of offers on the app, pay-
ment details will also be collected.
The information collected allows the app to provide the services
required, such as enabling remote control of water temperature,
monitoring consumption or indicating when the Clearray® bulb or
the filter cartridge needs to be replaced.
If a particular part should break, the app lets you contact your
preferred dealer via email or by phone, so that they can access the
error messages and then provide effective help in pinpointing the
cause of the fault.
For any questions regarding the processing of personal data and
the relative regulations on privacy, please visit our website: www.
jacuzzismarttub.com
Registration
- First of all, download the SmartTub™ app from the Google Play
store or the Apple store.
- Launch the app: to create an account, select "sign up" and
enter your email address, a password and the serial number
of your hot tub (found under the QR code, next to the control
panel); you can also use the QR reader incorporated in the app
to read the hot tub's QR code.
to or decline the option to receive information about the use and
maintenance of the hot tub that is suggested by the app; alternati-
vely, you can also go to: Jacuzzi.app@jacuzzi.com to express your
choice.
Home menu
- Once the registration process is completed, to access the Home
menu enter the email address and password previously used.
- From this menu you can:
• adjust the temperature by using cursors + or –;
• access the Jet menu
this menu lets you activate the various pumps via the
respective switches.
Note: the options available are automatically set up based on
the hot tub's standard equipment.
• access the Light menu
lets you select the colour you want for the hot tub's lighting
system. By selecting "Brightness" you can also adjust the light
intensity. If the hot tub is equipped with multi-zone control,
you can adjust its colour and intensity independently, by
selecting the respective zone below the menu.
To go back to the Home menu, close the Light menu.
• access the Monitor menu
this menu lets you set the start time and run time of the fil-
tration cycles. IT IS also possible to select additional filtration,
which activates the Hydro 1 pump at intervals to intensify
actual filtration; this option relates to the following modes:
- "away" or "holiday" (off);
- "frequent" or "heavy" (on for 20 minutes every day);
- "infrequent" or "light" (on for 20 minutes on alternate days);
To optimise electricity consumption, the heater can be activa-
35
Note: you can agree
this menu