Set Menu - Yamaha RX-V450 Owner's Manual

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
BASIC SETUP
Use to quickly setup basic system parameters (see page 23).
MANUAL SETUP
Use to adjust speaker and system settings.
1 SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you perform "BASIC SETUP" (see page 23). You can
use SOUND MENU to make further adjustmen
Item
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)CENTER GEQ
E)LFE LEVEL
F)D. RANGE
G)AUDIO SET
2 INPUT MENU
Use to reassign digital input/outputs and select the input mode.
Item
A)I/O ASSIGN
B)INPUT MODE
3 OPTION MENU
Use to adjust the optional system parameters.
Item
A)DISPLAY SET
B)MEMORY GUARD
C)PARAM. INI
D)ZONE SET
48
SET MENU
ts.
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
Adjusts the output level of each speaker.
Adjusts the delay time of each speaker.
Adjusts the tonal quality of the center speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital or DTS signals.
Customizes the muting level and audio delay.
Assigns jacks according to the component to be used.
Selects the initial input mode of the source.
Adjusts the brightness of the display and converts video signals.
Locks sound field program parameters and other SET MENU settings.
Initializes the parameters of a group of sound field programs.
Specifies the location of the speakers connected to the SPEAKERS B terminals.
Features
Features
Features
Page
50
51
51
51
51
51
52
Page
52
52
Page
53
53
53
53