Yamaha RX-V450 Owner's Manual page 32

PLAYBACK
Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select a decoder manually
(PLIIx Music, EX/ES or EX).
• 6.1-channel playback is not possible even if EX/ES is pressed in
the following cases:
– When "SURR LR" (see page 50) or "SURR B" (see page 50)
is set to NONE.
– When the source connected to the MULTI CH INPUT jack is
being played.
– When the source being played does not contain surround left
and right channel signals.
– When a Dolby Digital KARAOKE source is being played.
– When "2ch Stereo" or "Direct Stereo" is selected.
• When the power of this unit is turned off, the input mode will be
reset to AUTO.
• When the DTS-ES decoder is applied to DTS 96/24 signals, you
cannot use the DTS 96/24 decoding feature.
• The Pro Logic IIx decoder is not available when "SURR B" is
set to NONE (see page 50).
30
Enjoying 2-channel software
Signals input from 2-channel sources can also be played
back on multiple channels.
Press q/DTS on the remote control to select the
decoder.
q/DTS
You can select from the following decoders depending on
the type of software you are playing and your personal
preference.
PRO LOGIC SUR. STANDARD
Standard processing for Dolby Surround sources.
PRO LOGIC SUR. ENHANCED
CINEMA DSP enhanced processing for Dolby Surround
sources.
PRO LOGIC IIx Movie
Dolby Pro Logic II/IIx processing for movie software.
PRO LOGIC IIx Music
Dolby Pro Logic II/IIx processing for music software.
PRO LOGIC IIx Game
Dolby Pro Logic II/IIx processing for game software.
DTS Neo:6 Cinema
DTS processing for movie software.
DTS Neo:6 Music
DTS processing for music software.
*
Use the PLII/PLIIx parameter to select the Pro Logic II or Pro
Logic IIx decoders (see page 60).
Note
The Pro Logic IIx decoder is not available when "SURR B" is set
to NONE (see page 50).
9
*
*
*