Contents
BASIC TROUBLESHOOTING
My HEOS device turns off and the power LED flashes in red
The protection circuit has been activated due to a rise in temperature within your HEOS device. Turn the power off, wait about
0
an hour until this device cools down sufficiently, and then turn the power on again.
Music cuts out or delays sometimes
Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may
0
be using most of your bandwidth (especially if they are streaming video).
Make sure your HEOS devices are within range of your wireless network.
0
Make sure your HEOS devices are not located near other electronic devices that could interfere with it's wireless connectivity
0
(like microwave ovens, cordless phones, TVs, etc...).
Setup
Use
Solution
Solution
Troubleshooting
Troubleshooting
50
Status LED
Appendix
Refer to Page
Refer to Page
–
6
6
6