Advanced Settings; Network Settings; Firmware Upgrade - Denon HEOS Super Link Owner's Manual

Contents

Advanced settings

Caution
Adjusting these settings may disconnect your device from your network
0
and possibly render your device unusable. Do not use these features
unless you are comfortable making advanced adjustments.
o Network settings
1
Select "Advanced".
2
Select "NETWORK SETTINGS" tab.
a. Manual or static IP address for your device
b. Deep Standby (v p. 49)
3
Select "Save Settings" to apply the new settings or
"Cancel Changes" to revert to the previous settings.
NOTE
0 "Deep Standby" needs to be set in all four zones to enable this setting.
Setup Use Troubleshooting
o Firmware upgrade
1
Select "Advanced".
2
Select "FIRMWARE UPDATE" tab.
Update status
n
Manually check for a firmware upgrade.
Allow updates
n
ON
(Default):
OFF:
3
Select "Save Settings" to apply the new settings or
"Cancel Changes" to revert to the previous settings.
44
Status LED Appendix
Allows updates
Does not allow updates