Power Management; Power Modes - Denon HEOS Super Link Owner's Manual

Network multi-room pre-amplifier
Hide thumbs Also See for HEOS Super Link:
Table of Contents

Advertisement

Contents

Power management

Power modes

o Quick Start Mode
To save power, the device will automatically enter "Quick Start Mode"
whenever there is no network access or playback for 20 minutes and
will automatically resume to full power whenever the device is selected
and playing music.
The each Zone indicator will be dimmed during Quick Start Mode as it
is a fully automatic function.
Also push Power button, the device enter Quick Start Mode.
When all zone enter Quick Start Mode, Power indicator will be red.
Setup
Use
Troubleshooting
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired network connection is removed for more than 60
minutes in Quick Start Mode. Power indicator will turn off during Deep
Standby. To "wake" a HEOS device from Deep Standby, you must
press the standby button which will immediately turn on Power
indicator.
Power button for more than 6 seconds, the device enter Deep
Standby.
NOTE
0 "Deep Standby" needs to be set in all four zones to enable this setting.
o Off
To completely turn off the power to the device you must switch to OFF
of power switch on rear panel.
49
Status LED
Appendix

Advertisement

Table of Contents
loading

Table of Contents