Panasonic KX-TGH260BX Operating Instructions Manual page 67

Answering system
Problem
The unit does not record
new messages.
I cannot operate the
answering system
remotely.
The unit does not emit the
specified number of rings.
Bluetooth PIN
Problem
I cannot remember the PIN.
Cause/solution
R The answering system is turned off. Turn it on (page 52).
R The answering system does not answer or record calls from
mobile lines.
R The message memory is full. Erase unwanted messages
(page 53).
R The recording time is set to "Greeting Only". Change the
setting (page 58).
R Your service provider/telephone company's voice mail service
may be answering your calls before the unit's answering
system can answer your calls. Change the unit's number of
rings setting (page 57) to a lower value, or contact your service
provider/telephone company.
R The answering system will not answer incoming calls while the
other devices such as headset or handsets are engaged in a
call.
R The remote access code is not set. Set the remote access
code (page 56).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 56).
R The answering system is turned off. Turn it on (page 57).
R You cannot operate the answering system when calling a
mobile phone paired to the base unit.
R If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Cause/solution
R Change the PIN using the following method.
1
M N (right soft key) #619
2
*7000
3
Enter the new 4-digit PIN. a MOKN
4
Enter the new 4-digit PIN again. a MOKN a M
Useful Information
N
67