Panasonic KX-TGH260BX Operating Instructions Manual page 18

Link to Mobile
2
MbN: Select the desired setting.
3
MOKN a M N
Note:
R Some mobile phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your mobile
phone.
Connecting/disconnecting the mobile
phone manually
If you will not be using the paired mobile
phone's link to mobile feature temporarily (for
example, you do not want the unit to ring
when your mobile line receives a call), you
can disconnect your mobile phone from the
base unit. If you want to use it again,
reconnect the mobile phone to the base unit.
Note:
R Even if a paired mobile phone was
disconnected from the base unit, if it is
brought within the base unit's range during
the auto connection interval, it may
automatically connect to the base unit
(page 17).
R A disconnected mobile phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
1
To connect/disconnect:
For Mobile 1: M
#6251
For Mobile 2: M
#6252
R A long beep sounds.
2
M N
Mobile line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the mobile line only mode.
Important:
R If you turn on the "Mobile Line Only
Mode", disconnect the telephone line cord
from the base unit. Otherwise the "Mobile
Line Only Mode" cannot be activated.
18
N (right soft key)
N (right soft key)
1
M N (right soft key) #157
2
To turn on:
MbN: "On" a MOKN a
MbN: "Yes" a MOKN
To turn off:
MbN: "Off" a MOKN
Note:
R Once you set this mode, you can use the
following buttons to make mobile calls for
the handset, press M
M N (page 20).
R Once you set this mode, the following
features cannot be used:
– Landline features (page 38)
– Answering system (page 52)
Messages cannot be received.
– Voice mail features (page 59)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from mobile
phones or headset are disconnected. If
the auto connection is turned on
(page 17), the mobile phones are
reconnected.
– will be displayed on the handset
momentarily. The handset can be used
once is displayed.
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Mobile line
only mode (If you do not use the landline)",
page 18.
Mobile line selection
This feature determines which mobile line is
selected to make mobile calls when:
– you press M N on the handset.
– you press M N or M N on the handset
while the mobile line only mode is turned on.
The following settings are available:
– "Manual" (default): You can select the
desired mobile line when making a call.
– "Mobile Phone 1"
selected.
– "Mobile Phone 2"
selected.
N or M N instead of
*1 : Mobile 1 is
*1
: Mobile 2 is