Manual Setup: Sound - Yamaha DSP-Z9 Owner's Manual

Manual setup: Sound

Use this menu to adjust the sound parameters.
1
Press TOP on the GUI remote control.
2
Select Manual Setup, then press h.
3
Select Sound, then press h.
4
Select the desired parameters, then press h
to access and adjust.
Cinema EQ (Cinema equalizer)
Use this feature to adjust PEQ and high frequency levels
for any speaker.
Manual Setup > Sound > Cinema EQ
Choices: Off, On, PEQ*, HIGH*
*
When PEQ or HIGH is selected, you can set a frequency
between 1.0 and 12.7 kHz and a level between –9 and +3 dB.
• Front & Center adjusts levels for the front left, front
right, and center speakers.
• Surround adjusts levels for the surround left and
surround right speakers.
• Surround Back adjusts levels for the surround back
left and surround back right speakers.
• Presence adjusts levels for the front presence left and
right speakers.
Graphic EQ (Graphic equalizer)
Use this feature to select the parametric (Auto Setup PEQ)
or graphic equalizer (Manual GEQ).
To access these parameters, select:
Manual Setup > Sound > Graphic EQ >
SYSTEM OPTIONS
61