Foot Switch Unit - Yamaha DG60FX-112 Owner's Manual

Foot Switch Unit

Top Panel
#4
#4 Foot Switches 1, 2, 3
According to the settings in the Utility Mode (
23), the switches can be used as for the following
functions.
• Selects a patch (1/2/3) from the currently selected bank.
• Switches the effect blocks ON/OFF (1: Modulation Block, 2:
Delay Block, 3: Reverb)
#5 Bank Switch (TAP/BANK/TUNER)
• Tap the switch: Sets the Delay Time according
to the tempo at which the switch is tapped. (
page 20)
• Press the switch until the Foot Switches 1-3
and Bank Switch lamps and the display on
the main unit flashes.: Use the foot switches
1-3 to change the Area/Group/Bank. (
16)
• Hold the switch until "
play. (The Foot Switch 1-3 and Bank Switch
lamps all go off.) : Enters the Tuner Mode. (
page 22)
#6 EXP Pedal Jack (EXP. PEDAL)
Connect a foot controller (expression pedal) (op-
tional) such as the YAMAHA FC-7, etc. to this jack,
and control DG60FX-112 parameters or use the de-
vice as a wah pedal. (
page
page
tu
" appears in the dis-
pages 21, 25)
#5
#7 Unit Terminal
Use the supplied special cable to connect the
Foot Switch Unit to the FOOT SW jack
rear panel of the main unit. (
Nomenclature
Rear Panel
#6 #7
# 0
on the
page 10)
9