Wah Pedal Settings; The Speaker Simulator - Yamaha DG60FX-112 Owner's Manual

Wah Pedal Settings

These settings are available when the Wah Pedal
UUH
function (" ") is selected as the controller in the
External Control settings.
Press the [UTILITY] button then set the amp select
UUH
switch to CRUNCH1 ("
play).
Set the Low Frequency of the Wah Pedal
Sets the low frequency in the wah pedal's frequency
range.
Press the [COMP] button and use the [UP]/[DOWN]
buttons to set the frequency (
Set the High Frequency of the Wah Pedal
Sets the high frequency in the wah pedal's frequency
range.
Press the [CHORUS] button and use the [UP]/
[DOWN] buttons to set the frequency (
5. 0 0
:kHz).
Set the Wah Pedal "Q"
Sets the frequency curve of the wah pedal.
Press the [FLANGER] button and use the [UP]/
[DOWN] buttons to select a curve (
" will appear on the dis-
150 500
- :Hz).
1. 5 0
-
1. 0 0 5. 0 0
- ).

The Speaker Simulator

Press the [UTILITY] button then set the amp select
switch to CRUNCH2. The current setting will appear
on the display.
Use the [UP]/[DOWN] buttons to select a speaker
simulator mode.
GLb
• : The speaker simulator is always ON.
PrG
• : The speaker simulator is switched ON/
OFF according to the patch setting.
oFF
• : The speaker simulator is always OFF
Utility Mode
27