Henny Penny HC-4 Service Manual page 23

2-15. CONTROLS -
COUNTDOWN
TIMERS (CDT)
(Continued)
Special Program Mode - Consists of Setup Mode and Tech
Mode.
Setup Mode
• Fahrenheit or Celsius
• Initialize System - One button programming for times and
temperatures
Fahrenheit or Celsius
1. Press and hold the PROGRAM button for 4 seconds.
2. "SetUP" and "Tech" are displayed.
3. Press a timer button under the word "SetUP".
Ex: Setup
1 2 Press either 1 or 2.
4. Enter access code 1, 2, 3.
5. "SetUP deg. F" is displayed.
6. Press the INCREASE or DECREASE buttons to toggle from
"F" (Fahrenheit) and "C" (Celsius).
7. When correct setting displays, press the PROGRAM button
to move to initialize system, or press and hold the PRO-
GRAM button to exit programming.
CE and international units must have the temperature read-
ings in Celsius. Follow above procedures and set to "C".
Initialize System
1. Press and hold the PROGRAM button for 4 seconds.
2. "SetUP" and "Tech" are displayed.
2-15