ResMed Stellar 150 Manual page 5

2020 September. Ontario VEP Stellar™150:
to Your External Battery: ©2020 Ontario Ventilator Equipment Pool. All rights reserved. Rev date: 10/01/2020
The auxiliary power connector has an ON (I) and OFF
(O) toggle switch.
Make sure the toggle switch is in the ON (I) position.
The other end of the cable attaches to your Stellar™150
device.
The DC power inlet is located at the back of the device,
beside the main power inlet. It has a flat side as well as a
rounded corner side. Make sure the cable, which also has
a flat and rounded side is positioned properly before
insertion.
Insert the connector firmly into the DC power inlet, making
sure it is firmly seated in place.
Leave the main power cord in place, there is no need to
remove it when using the external battery. Once power is
restored, the device will automatically revert to mains AC
power.
Charging Your External Battery for the Stellar™150/ Connecting Your Stellar™150