ResMed Stellar 150 Manual page 4

Connect
connector from your cable to the
white ended Hubbell connector
from the external battery, making
sure they are firmly attached by
turning clockwise to connect
2020 September. Ontario VEP Stellar™150:
to Your External Battery: ©2020 Ontario Ventilator Equipment Pool. All rights reserved. Rev date: 10/01/2020
You have been supplied with cables and
connections to plug into your external battery
and into the Stellar™150 device.
These cables may have come attached or may
have to be assembled prior to use. It is a good
idea to have your cable assembled and ready for
use in the event of a power failure. Store them,
ready for use and connected, near your device so
you don't have to look for them in the event of a
power failure.
the black Hubbell
If the connector is not already attached, make sure the
black cap is removed from the end of the cable.
Insert the auxiliary power connector firmly into the
uncapped connector insuring a snug fit.
Charging Your External Battery for the Stellar™150/ Connecting Your Stellar™150