Function Parameters - Siemens SIMOTION ADI4 Manual

3.5

Function parameters

Parameters
All function-specific parameters of the ADI4 DP slave are set in the "Encoder" tab:
● Encoder type
● Unipolar spindle (or unipolar motor)
● Shutdown ramp
● Shutdown delay
● Tolerable sign-of-life failures
● Reserved bits for fine resolution
● 611U conformant mode
The figure shows the corresponding dialog box with sample values for the various encoder
types and parameters.
Figure 3-3
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
"DP Slave Properties" dialog box, "Encoder" tab
Parameter assignment
3.5 Function parameters
43