3.6.9
Alignment
Procedure
The alignment is used to transfer the values of the current ADI4 DP slave displayed in the
"Isochronous operation" tab to all the other ADI4 DP slaves of the configuration.
Dialog: End
Dialog: DP slave properties
OK
Figure 3-16
SIMOTION ADI4 - Analog Drive Interface for 4 Axes
Manual, 05/2009, 6FC5 297-0BA01-0BP6
Tab: Isochronous operation
Button: Alignment
"DP Slave Properties" dialog box
3.6 Parameter assignment of the DP communication
Parameter assignment
67