Parameters/Address Space; Parameters; Explanation Of The Parameters; Enabling Configuration Control - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.1

Parameters

Parameters for IM 155-6 PN BA interface module
The following table shows the parameters for the IM 155-6 BA interface module.
Table 4- 1
Parameters
Configuration control
4.2

Explanation of the parameters

4.2.1

Enabling configuration control

You can use this parameter to enable the configuration control function in the ET 200SP
distributed I/O system.
Note
If you configure the enable, the ET 200SP distributed I/O system requires a control data
record 196 from the user program in order for the ET 200SP distributed I/O system to
operate the I/O modules.
Reference
You can find more information on the control data record in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual and
in the STEP 7 online help.
16
Parameters for interface module IM 155-6 PN BA (GSD file)
Range of values
Disable/enable
Default
Disable
IM 155-6 PN BA interface module (6ES7155-6AR00-0AN0)
Manual, 03/2015, A5E34934425-AA
4
Efficiency range
ET 200SP