Table of Contents
Advertisement
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following.
Sound does not change when using knobs or sliders.
•
Are the MIDI Out port and Device Number set correctly in the Editor Setup?
No sound heard when clicking on-screen keyboard in Edit Window.
•
Is the MIDI channel set correctly in the Editor Setup?
Sound does not change when Monitor button is pressed.
•
Are the MIDI Out port and Device Number set correctly in the Editor Setup?
Bulk data is not transmitted.
•
Are the MIDI Out port and Device Number set correctly in the Editor Setup?
•
Is the Dump Interval in the Editor Setup too short? Make sure to adjust the Dump Interval.
Bulk data is not received.
•
Open the Setup Dialog and check that the Device Number has been properly assigned
(page
14).
•
Is the MIDI Thru port set to off in the client application?
MIDI In/Out port is not available in Editor Setup.
•
The MIDI In/Out port in Editor Setup is selected from the MIDI In/Out ports in the host appli-
cation. Check the MIDI In/Out settings in the host application.
The USB port is not recognized.
•
Check whether the USB driver has been installed to your computer correctly. See the instal-
lation manual for details.
(page
14)
33
(page
14)
(page
14)
(page
14)
Advertisement
Table of Contents
