Yamaha VE Owner's Manual page 29

8 FINE................................ Use the "FINE" knob to further fine-tune it.
9 CUTOFF ......................... Use the "CUTOFF" knob to set its LPF Cutoff Frequency.
0 VELOCITY ...................... Use the "VELOCITY" knob to define how the Element's filter opens/
A RESO.............................. Use the "RESO" knob to set the LPF Resonance level.
B HPF................................. Use the "HPF" knob to set the HPF Frequency.
C AMPLITUDE VELOCITY. Use the "VELOCITY" knob to define how the Element's output level
D RECEIVE NOTE ............. Click on the text box and select whether or not to receive notes.
E KEY ASSIGN .................. Click on the text box and select Single key assignment or Multi key
F ALTERNATE GROUP ..... Click on the text box and select an alternate group number. This is
G FILTER ............................ Drag one of the handles horizontally to adjust the Element's "HPF Cut-
n
To set these values directly, select the "OSCILLATOR" tab of the DRUM KEY DETAIL Dialog.
H AMPLITUDE EG ............. Drag the first handle (furthest to the left) horizontally to adjust the Ele-
n
To set these values directly, select the "PARAMETER" tab of the DRUM KEY DETAIL Dialog.
I EQ................................... Click on the text box and select the EQ type. With the "EQ L/H" and
n
To set these values directly, select the "OSCILLATOR" tab of the DRUM KEY DETAIL Dialog.
J LEVEL............................. Use this knob to set the level of the Element.
K PAN ................................. Use this knob to set the stereo position of the Element.
L RNDM PAN ..................... Use this knob to set the Element's "Random Pan" depth.
M ALTER PAN..................... Use this knob to set the "Alternate Pan" depth.
N Output Assignment
selector ........................... Click on the text box and select the output(s) to which the Element will
O EF1/EF2/THRU............... Click the [EF 1] switch to pass the signal through Insertion Effect 1.
P REVERB ......................... Use the "REVERB" knob to set the level of the by-passed signal sent
Q CHORUS ........................ Use the "CHORUS" knob to set the level of the by-passed signal sent
R DETAIL............................ Click this to open the "DRUM KEY DETAIL" dialog and input all Ele-
n
The signal output from EQ is sent to LEVEL at the left bottom of the Drum Key Dialog.
n
If the OSCILLATOR TYPE is set to "Voice," parameters 7, 9 -14, 16 -19, 22, 23, 26, and 27 described
above are not available.
closes in response to note velocity.
varies with note velocity.
assignment.
used to prevent a pair of drum sounds from sounding simultaneously
(for example, an open and closed hi-hat).
off Frequency." Drag the other handle vertically to adjust its "LPF Res-
onance," and horizontally to adjust its "LPF Cutoff Frequency."
ment's "Attack Time." Drag the second horizontally to adjust its "Decay
1 Time," and vertically to adjust its "Decay 1 Level." Drag the last han-
dle (furthest to the right) horizontally to adjust its "Decay 2 Time."
"P.EQ" types, you can adjust some EQ parameters using the handles
in the graphs. Drag one of the handles horizontally to adjust the Ele-
ment's "EQ Low Frequency," and vertically to adjust its "EQ Low Gain."
Drag the other handle horizontally to adjust the Element's "EQ High
Frequency" (or "EQ Resonance" if the P.EQ type has been chosen)
and vertically to adjust its "EQ High Gain."
be sent.
Click [EF 2] to pass it through Insertion Effect 2. Click [THRU] to
bypass the Insertion Effects.
to the Reverb unit.
to the CHORUS unit.
ment values directly (except the Keyboard note assignment).
29