Create Measure - Yamaha QY100 Owner's Manual

Creates a specified number of blank measures having the specified
time signature for all tracks. The created measures are inserted at a speci-
fied measure number, and all subsequent measures are moved forward to
make room.
The "M" parameter above the graphic bar specifies the measure at
which the newly created measures will be inserted.
The time signature parameter below the graphic bar determines the
time signature of the measures to be created: 1/16 ... 16/16, 1/8 ... 16/8, 1/
4 ... 8/4.
The "Measure" parameter below the bar specifies the number of
measures to be created.
After setting the parameters as required press [ENTER] to execute
the Create Measure job. The metronome icon will appear on the display
while the data is being processed, then "Completed !" will appear briefly
when the job is done. Press the [EXIT] button to return to the job list, or a
mode button to go directly to the selected mode.
NOTE
• All existing measures after the point at which the new measures are created will be
moved forward to make room for the new measures.
• If you use the Create Measure job with an empty song, the specified new measures
will be placed in track 1 only.
• Use Create Measure when you want to add new material somewhere in the middle
of data you've already recorded, without erasing the existing data. First create the
required measures, then either copy the data from existing measures using the
Copy Event function, or record new data as required.
The Song Jobs

15 : Create Measure

First measure
Last measure
First beat
Last beat
171