Erase Event - Yamaha QY100 Owner's Manual

Erases all note and event data from the specified measure or range
of measures in the specified track. An erase operation leaves the specified
measures intact but blank.
The "TR" parameter selects the track to be affected by the Erase
Event job: "01" ... "16" for the sequencer tracks, the accompaniment "Pt"
track, the accompaniment "Cd" track, or the "Tm" track.
The "M" parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be erased.
After setting the parameters as required press [ENTER] to execute
the Erase Event job. The metronome icon will appear on the display while
the data is being processed, then "Completed !" will appear briefly when
the job is done. Press the [EXIT] button to return to the job list, or a mode
button to go directly to the selected mode.
NOTE
• Unlike the Delete Measure job, the Erase Event job erases the data from the speci-
fied measures only in the specified track. Also, the data is erased but the measures
remain intact (i.e. the subsequent measures are not moved back). After an erase
operation you can record new material in the resulting blank measures as required.
164
The Song Jobs

10 : Erase Event

First measure
Last measure
Last beat
First beat