Compatible Memory Cards; Memory Card Capacity; Inserting And Removing Memory Cards - Yamaha QY100 Owner's Manual

The QY100 uses 3.3V (3V) SmartMedia memory cards. 5V memory
cards cannot be used.
SmartMedia memory cards with any of the following capacities can
be used: 2MB, 4MB, 8MB, 16MB and 32MB. Memory cards with higher
capacities can be used as long as they conform to SSFDC* Forum specifi-
cations.
* SSFDC stands for "Solid State Floppy Disk Card", the alternate name for SmartMedia cards.
The SSFDC Forum is an organization which develops and defines the standards for these
memory cards.

Inserting and Removing Memory Cards

NOTE
• It is recommended to insert and remove memory cards in some displays other than
CARD mode.
To Insert a Memory Card
Carefully insert the card as far as it will go into the CARD slot (with-
out using excessive force) with the gold connectors on the card facing
upward (i.e. toward the top panel of the QY100). The connector end of the
card goes into the slot.
Do not attempt to insert the card the wrong way around (upside-
down or back-to-front), and make sure that dirt other objects don't get into
the CARD slot.
To Remove a Memory Card
The memory card can be removed from the unit simply by gripping
the protruding edge and pulling firmly outward. However, DO NOT remove
a memory card while any card access operation is in progress: save, for-
mat, delete, or load!! Also note that the QY100 will automatically access
the memory card whenever a card is inserted while the power is turned on
in order to determine the card's type.
Memory Card Functions

Compatible Memory Cards

Memory Card Capacity

255