Viewing The Active Scan List - Motorola TETRA MTP850 Feature User Manual

• Upon pressing Select, if the Network List is selected, only
this list will attach. If a user list is selected, then both the
Network List and the user list will be attached.
• In some cases part of the groups in the scan list could be
invalid for specific sites. In this case, when the terminal
tries attachment to the list, the infrastructure might partially
reject attachments. The terminal's display shows: "List
partially attached".
• When the Network List is empty, it will be displayed as No
List. Selecting No List will display the message No
Selected Scan List.

Viewing the Active Scan List

This sub-menu allows you to view the active scan list (Scan
List 1 in this example).
1. From the main menu, select More > Group Setup > Scan
> Active List
The display will show one of the following states:
• There is a selected, inactive scan list (Scan List 1 is
Not Active). Scanning is off.
• Scanning is off and the Network List is selected (Net-
work List Not Active).
• There is a selected, active scan list. Scanning is on.
Then, the display will show the Scan Lists
sub-menu.
2. Scroll to the required list and press
see the groups that belong to the list.
3. Scroll to the required group and press
View to view the group status (attached or
not attached) and priority (if pre-programmed).
4. Press
required, press
from the scan list or change its priority.
If the Network List is empty, it will not be displayed.
100
. Press View.
to return to the previous display. Then, if
Back
MENU
View
.
You can select to delete the group
Scan Lists
Scan List 1
to Network List
View Back