Attaching The Antenna; Powering On/Off (On-Off/End/Home Key); Powering On (Emergency Button); Powering On With Transmit Inhibit (Txi) Active - Motorola TETRA MTP830 Basic User's Manual

Portable terminal

Hide thumbs Also See for TETRA MTP830:

Table of Contents

Attaching the Antenna

Turn the MTP830 Off before installing or removing the antenna.

Insert the bottom of the antenna into the screw-in base on the top of

the MTP830. Turn clockwise until snug. Do not force.

Powering On/Off (On

To power On, press and hold

check and registration routine. After successful registration, the

MTP830 is in service.

To power Off, press and hold

Powering Off message is displayed.

Press and hold the Emergency button to power On. The MTP830

will power On in Emergency Mode or in standard mode

(as programmed).

Transmit Inhibit is a feature allowing you to switch off transmission

before entering a Radio Frequency (RF) sensitive area. To activate

this feature, press

> TXI Mode > Activate.

Off/End/Home Key)

. Your MTP830 performs a self-

. You will hear a beep and the

and select More... > Networks

Pressing the Emergency button, even if

Transmit Inhibit is activated, causes the

MTP830 to transmit immediately. The MTP830

must NOT be within the RF sensitive area when

entering Emergency Mode.

Table of Contents

Table of Contents