Editing Scan Lists - Motorola TETRA MTP850 Feature User Manual

Editing Scan Lists

1. From the main menu,
select More > Group
Setup > Scan > Scan
Lists
.
2. Scroll to the required
scan list. Press
Press
Back
3. To edit/view the contents of a scan list, press
4. In the List Optns sub-menu, scroll to the required option
and press
The options below cannot be used for the Network List.
• If the Network List is empty, it will not be displayed.
•
Rename
use, see "Writing Text" on page 121). Enter a new name
(alias) and press
• Check the capacity of the active scan list (number of
groups stored in the list).
• To
Clear
You will be prompted to remove all groups from the
Yes.
selected scan list.
• a group to the selected scan list. Every added
Add
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
View
to see the groups used in the scan list.
View
to return to the previous display.
Select.
the active scan list. (For details on text editor
The display shows the new setting.
Ok.
all groups from the selected scan list, press
Scan Lists
Scan List 1
Scan List 2
Network List
Back
to select a folder.
Ok
Ok.
List Optns
Rename
Capacity
Clear List
Add Group
Edit
Select Back
.
MENU
101