Setting The Display's Working Language; Setting Up The Data Function - Motorola TETRA MTP850 Feature User Manual

Setting the Display's Working Language

From the main menu, select Setup >
Language
The display shows the current language
used. You can customize your MTP850 to
operate in English, German, French, Spanish,
Dutch, or in a language defined by your
Service Provider. The default setting from factory is English.
Scroll to the desired language and press
shows the selected language for a few seconds.

Setting Up the Data Function

You can connect the MTP850 to an external device (such as
a laptop or desktop PC). The MTP850 will then be capable of
transmitting and receiving data from the external device. To
connect the MTP850 accessory connector to the external
device, use cable FKN4897. The external device must run an
application complying with the TETRA standards.
From the main menu, select Setup > Data
Setup
.
The display shows the current setting:
•
Voice Only
transmit voice calls only.
•
Data Only
modem. The MTP850 will reject incoming and outgoing
voice calls (except for Emergency Calls), status and text
messages.
•
Voice & Data
calls will have priority over data calls and will interrupt
them.
Scroll to the desired setting and press
In Data Only and in Voice & Data, the Data Connected icon is
displayed after you have connected the MTP850 to the
external device and the MTP850 is ready for data transfer.
92
.
— The MTP850 will receive and
— The MTP850 acts as a
— The MTP850 acts as a modem but voice
Language
English
Deutsch
Français
Español
Nederlands
Select
The display
Select.
Data Setup
Voice Only
Data Only
Voice & Data
Select
Select.
Back
Back