How To Tune; Changing The Tuner Settings - Boss GT-6B Owner's Manual

Boss owner's manual bass effects processor gt-6b
Hide thumbs Also See for GT-6B:
Table of Contents

Advertisement

At this time, the indicators of the PATCH
PATCH
pedals light, indicating that the instrument is
precisely in tune.
fig.08-06

How to Tune

1. Play a single open note on the string being tuned.
The name of the note closest to the pitch of the string that
was played appears in the display.
* Only play a single note on the one string being tuned.
2. Tune the string until the string name appears in the
display.
General Four-String Bass
4th
Regular
E
1/2 Step Down
D#
1 Step Down
D
General Five-String Bass
5th
Regular
1/2 Step Down
A#
1 Step Down
A
General Six-String Bass
6th
Regular
1/2 Step Down
A#
1 Step Down
A
3. As you watch the Tuning Guide, adjust the bass's
tuning until " " appears in the center.
When the sound is lower than the indicated note name
"
" appears to the left of center in the Tuning Guide.
fig.08-51
The pedals' indicators flash from right to left.
and
too high
tuned
too low
3rd
2nd
1st
A
D
G
G#
C#
F#
G
C
F
4th
3rd
2nd
1st
B
E
A
D
D#
G#
C#
F#
D
G
C
F
5th
4th
3rd
2nd
1st
B
E
A
D
G
D#
G#
C#
F#
B
D
G
C
F
A#
Chapter 8 Convenient Features of the GT-6B
When the sound is higher than the indicated note name
"
" appears to the right of center in the Tuning Guide.
fig.08-52
The pedals' indicators flash from left to right.
4. Repeat Steps 1–3 until all of the strings are tuned.

Changing the Tuner Settings

You can change the following tuner-related settings.
Standard Pitch (435–445 Hz)
fig.08-07
The frequency of A4 (the middle A on a piano keyboard)
played by an instrument (such as a piano) that provides the
pitch to which the other instruments refer in tuning before a
performance begins is called the standard pitch. You can set
the standard pitch on the GT-6B to frequencies from 435 to
445 Hz.
* This is set to 440 Hz when shipped from the factory.
1. Turn the Tuner function on.
2. Press PARAMETER [
displayed.
3. Rotate the VALUE dial to change the settings.
4. Press [TUNER/BYPASS] or [EXIT] to return to the Play
screen, or press PARAMETER [
Tuner screen.
] until "TUNER Pitch" is
] to return to the
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents