Digital Performer - Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual

Remote Function List

■ Digital Performer:

Button
In all modes:
[SHIFT]+[PAN]
[SHIFT]+[NAME/VALUE]
[SHIFT]+[REMOTE]
[SEL] (in normal status)
[SHIFT]+[SEL] (in normal status)
[SEL] ([SEL] flashes)
[SEL] ([AUTO EDIT] lights)
[ON] (in normal status)
[ON] ([SOLO] lights)
[ON] ([REC RDY] lights)
[AUTO EDIT]
[SOLO]
[REC RDY]
[AUTO R/W] (while being pressed)
[AUTO R/W]+[SEL]
[GROUP] (while being pressed)
[GROUP] and the currently lit [SEL]
[SHIFT]+[GROUP]
[AUDIO]/[INSTRUMENT]/
[MIDI]/[BUS/AUX]/[OTHER]
BANK [</>]
[SHIFT]+BANK [</>]
[LOOP]
[F1] – [F8]
[SHIFT]+[F1]
[SHIFT]+[F2]
[SHIFT]+[F3]
[SHIFT]+[F4]
[SHIFT]+[F5]
[SHIFT]+[F6]
[SHIFT]+[F7]
[SHIFT]+[F8]
[UNDO]
[SHIFT]+[UNDO]
[SAVE]
[MARKER]
[SHIFT]+[MARKER]
[r]
[SHIFT]+[r]
[f]
[■]
[>]
[●]
[ZOOM]
FOOT SWITCH 1
FOOT SWITCH 2
[SCRUB]
112
01X Owner's Manual
On the 01X, set Remote Select (page 87) in the Utility mode to "DP."
Calls up the Mode list display.
Turns the Meter indication on or off.
Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode.
Selects a channel.
Selects multiple channels.
Fader touch-out (page 15)
Fader touch-in (page 15)
Turns each channel off or on (mutes/unmutes the signal).
Sets Solo for each channel to on or off.
Sets the REC RDY of each channel to on or off.
Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in.
Changes the function of the [ON] button to the Solo function.
Changes the function of the [ON] button to the REC RDY function.
Indicates the automation condition of the channel in the LCD.
• READ....... Automation = TOUCH
• READ....... Automation = LATCH
Switches the automation Read function on/off, and changes automation mode to Touch.
Indicates the Group to which the fader is assigned.
Releases the Group assignment.
Assigns the selected channels to a Group.
Displays the Mixer window
Scrolls through the track indication every eight channels.
Scrolls through the track indication channel-by-channel.
Turns Loop on or off.
No function
Displays the Track Overview.
Displays the Mixer window
Displays the Event List window for the selected channel.
Closes the current window.
Displays the MIDI Edit window.
Displays the Sequencer Editor window.
Displays the Soundbites window.
No function
Executes the Undo operation.
Executes the Redo operation.
When the lamp lights, press this so that the lamp flashes. Press this again to execute the
Save operation (lamp turns off).
Turns the Marker on or off.
Opens the Marker Option window.
Press to continuously rewind. Press again to rewind more quickly. When the Marker is
turned on, this operation moves the song position to the previous Marker.
Moves the song position to the top of the song.
Press to continuously fast-forward. Press again to fast-forward more quickly. When the
Marker is turned on, this operation moves the song position to the next Marker.
Stops recording or playback.
Press to start playback.
Press this to start song recording. The [>] (Play) and [●] (Rec) lamp are turned on dur-
ing recording.
Switches between Scroll (lamp lights), Zoom (lamp is off), and Nudge (lamp flashes).
Controls the function set in the Preferences in Digital Performer.
Controls the function set in the Preferences in Digital Performer.
Turns Scrub on and off. When turned on, you can use the dial to move the song position.
Function
Notes
LED
(page 114)
—
—
flashes *5
lights/goes out *2
lights/goes out *2
flashes ➝
goes out
flashes
lights/goes out *2
lights/goes out *2
lights/goes out *2
lights
lights
lights
lights *38
lights *36
—
—
—
—
—
—
—
—
—
—
— *23
—
— *23, 24
—
—
—
—
—
lights ➝ flashes
➝ goes out
—
—
—
—
—
—
lights
lights
goes out ➝
lights ➝ flashes
—
—
lights *25