Backing up system data. .....................................................................................................................................BACKUP ([SHIFT]+[UTILITY] (page 86)

Saving/recalling/deleting groups of programmed settings (Library). ............................................................................................... LIBRARY (page 36)

●

Using the channel Library. ........................................................................................................................[SHIFT] + [SELECTED CHANNEL] (page 103)

Saving the 01X's settings to a computer ................................................................................. Studio Manager (Studio Manager Owner's Manual; PDF)

●

■ Protecting data from accidental loss

Setting a Scene so that data cannot be deleted/edited (Scene Protect). ......................................................................................PROTECT (page 86)

●

Specifying a certain channel to not be affected by recalling a Scene (Recall Safe). .......................................................... RECALL SAFE (page 86)

●

Specifying the stereo channel to not be affected by recalling a Scene (Recall Safe). ........................................................ RECALL SAFE (page 86)

■ Entering data

●

Entering characters (Library name settings) ......................................................................................................................................... Title Edit (page 41)

■ Resetting parameters (Initializing)

●

Resetting the 01X to its default settings (Factory Set) ..................................................................................................................... Factory Set (page 42)

Initializing Scene parameters ................................................................................................................... Scene Library ➝ recalling Library #00 (page 85)

●

Initializing INPUT PATCH/OUTPUT PATCH parameters..........................................Input/Output Patch Library ➝ recalling Library #00 (pages 89, 91)

●

Initializing Channel parameters............................................................................................... Channel Library ➝ recalling Library #00 or #01 (page 103)

●

■ mLAN

Switches between automatic/manual setting of mLAN wordclock. ..................................................................................... W.CLK SELECT (page 92)

●

Setting the sampling rate (wordclock).

●

• When the 01X is the master ............................................................................................... mLAN AUTO W.CLK (mLAN AUTO Wordclock) (page 92)

• When using mLAN ...................................................................................................................................................... Auto Connector (Installation Guide)

■ Remote Control

Selecting the DAW/sequencer to be remotely controlled................................................................................................... REMOTE SELECT (page 87)

●

Emulating touch-sensitive fader control.

• Continuing automation recording even after fader movement is stopped. .................. REMOTE AUTOMATION SETUP/[SEL] (pages 15, 17, 88)

• Starting automation recording before fader is moved...................................................................................... [AUTO EDIT]/[SEL] (pages 15, 17, 88)

Setting the time that the 01X "waits" before turning off fader recording.

●

(Can also be set to no "time-out", or constant recording.) .....................................................................REMOTE AUTOMATION SETUP (page 88)

Remote control of the Multi-Part Editor, by using the [SHIFT] + [REMOTE] buttons. .........................................[SHIFT]+[REMOTE] (pages 37, 87)

●

Switching between remote control and internal mixer operation. ..................................................................................... Modes (Mode List) (page 37)

■ Miscellaneous operations

Speeding up adjustment of numeric values when using the knobs. .......................................................................... [SHIFT]+Channel knob (page 17)

●

Switching (exchanging) the functions of the channel faders and knobs............................................................................................... [FLIP] (page 19)

Assigning the function of the channel knob to the fader as well. ........................................................................................... [SHIFT]+[FLIP] (page 19)

●

Assigning control of the fader operation and

settings to odd/even channel pairs (setting one channel controls the other). ........................................................................... CH PAIR (page 102)

●

Assigning fader operations in groups. ...................................................................................................................................... FADER GROUP (page 101)

Assigning [ON] button operations in groups. ............................................................................................................................MUTE GROUP (page 101)

●

Switching between soloing of multiple channels or a single selected channel. ...................................................................... SOLO MODE (page 96)

■ Display

●

Toggling among the different display indications for the meter and parameter/value displays. .......................[SHIFT]+[NAME/VALUE] (page 46)

Determining the time the parameter value remains displayed (when NAME/VALUE is set to "NAME"). ................. PARAM DISP TIME (page 95)

●

Determining whether the channel level is shown or not when a fader is moved........................................................ FADER LEVEL DISP (page 95)

●

Switching the display indication between channels/parameters/values and only values. ................................................[NAME/VALUE] (page 17)

Switching between level meter display of the pre-fader signal or post-fader. .................................................................................................. (page 46)

●

Determining whether a conﬁrmation prompt appears or not for store/recall operations. ..................STORE/RECALL CONFIRMATION (page 95)

■ Input

●

Assigning the input signals (from MIC/LINE INPUT,

DIGITAL STEREO IN terminals) to the input channels on the mixer. .................................................................... INPUT PATCH (IN1-8) (page 88)

●

Assigning the input signals (from MIC/LINE INPUT,

DIGITAL STEREO IN terminals and Effects 1/2) to the stereo input channels on the mixer. ............................INPUT PATCH (ST1/2) (page 89)

●

Switching the phase setting of an input channel. ....................................................................................................................................PHASE (page 99)