Sonar - Yamaha DIGITAL MIXING STUDIO 01X Owner's Manual

Remote Function List

■ SONAR:

On the 01X, set Remote Select (page 87) in the Utility mode to "SONAR."
Button
In all modes:
[NAME/VALUE]
[SHIFT]+[NAME/VALUE]
DISPLAY [ / ] (Multi Channel)
[PAGE SHIFT]+DISPLAY [
(Multi channel)
DISPLAY [ / ]
(SELECTED CHANNEL)
[PAGE SHIFT]+DISPLAY [
(SELECTED CHANNEL)
[SHIFT]+[REMOTE]
[SEL] (in normal status)
[SEL] ([SEL] flashes)
[SEL] ([AUTO EDIT] lights)
[ON] (in normal status)
[SHIFT]+[ON] (in normal status)
[ON] ([SOLO] lights)
[SHIFT]+[ON] ([SOLO] lights)
[ON] ([REC RDY] lights)
[SHIFT]+[ON] ([REC RDY] lights)
[AUTO EDIT]
[SOLO]
[REC RDY]
[AUTO R/W]+[ON]
[AUTO R/W]+Knob
[AUDIO]
[INST]
[MIDI]
[BUS/AUX]
[OTHER]
BANK [</>]
[SHIFT]+BANK [</>]
[FLIP]
[FLIP] ➝ [FLIP]
[EDIT]
[LOOP]
[F1] – [F8]
[SHIFT]+[F1]
[SHIFT]+[F2]
[SHIFT]+[F3]
[SHIFT]+[F4]
[SHIFT]+[F5]
[SHIFT]+[F6]
[SHIFT]+[F7]
[SHIFT]+[F8]
[UNDO]
[SHIFT]+[UNDO]
[SAVE]
[WRITE]
[MARKER]
[r]
[SHIFT]+[r]
110
01X Owner's Manual
Changes the indication of the parameter name and its value.
Turns the Meter indication on or off.
Changes the parameter to be edited via a Knob in order one by one.
/ ]
Changes the parameters to be edited via a Knob in groups of eight.
Changes the indicated parameter in order one by one.
/ ]
Changes the indicated parameters in groups of eight.
Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode.
Selects a channel.
Fader touch-out (page 15)
Fader touch-in (page 15)
Turns each channel off or on (mutes/unmutes the signal).
Turns all channels on.
Sets Solo for each channel to on or off.
Sets Solo for all channels to off,
Sets the REC RDY of each channel to on or off.
Sets the REC RDY of all channels to off.
Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in.
Changes the function of the [ON] button to the Solo function.
Changes the function of the [ON] button to the REC RDY function.
This arms or activates fader automation.
This arms or activates the parameters assigned to the respective knobs. (This is not indi-
cated on the 01X.)
Assigns a Track to a Fader.
Assigns a Track to a Fader.
Assigns a Track to a Fader.
Assigns an AUX BUS to a Fader.
Assigns output level adjustment of the Virtual Main Bus to the Faders.
Scrolls through the track indication every eight channels.
Scrolls through the track indication channel-by-channel.
Assigns the functions of the Channel Knobs to the Faders.
Switches the functions of the Channel Knobs and the Faders.
Switches the current window.
Sets Loop to on or off.
[F1] – [F8] as defined in SONAR.
The same as [F1] as defined in SONAR.
The same as [F2] as defined in SONAR.
The same as [F3] as defined in SONAR.
Closes the current window.
The same as [F5] as defined in SONAR.
The same as [F6] as defined in SONAR.
The same as [F7] as defined in SONAR.
The same as [F8] as defined in SONAR.
Executes the Undo operation.
Executes the Redo operation.
Executes the Save operation.
Opens the window for entering the Marker to the current song position.
Turns the Marker on or off.
Reverse (or Rewind). When the Marker is turned on, this operation moves the song posi-
tion to the previous Marker.
Moves the song position to the top of the song. When the Marker is turned on, this oper-
ation opens the window for entering the Marker.
Function
Notes
LED
(page 114)
—
— *19
—
—
—
—
flashes *5
lights/goes out *2
flashes ➝
goes out
flashes
lights/goes out *2, 32
lights *2, 32
lights/goes out *2
goes out *2
lights/goes out *2
goes out *2
lights
lights
lights
lights *2
—
—
—
—
—
—
—
—
flashes
lights
—
lights/goes out
—
—
—
—
—
—
—
—
—
—
—
—
—
—
— *33
—