Error Messages - Yamaha SU700 Owner's Manual

Error Messages

SIMM CONFIG ERR
TOO MANY VOLUMES
NO DISK
UNKNOWN DISK
NOT SU700 DISK
BAD DISK
WRITE PROTECTED
CANNOT WRITE
DISK FULL
SAMPLE TOO LARGE
NO VOLUME
FILE NOT FOUND
ILLEGAL FORMAT
ILLEGAL FILE
NAME EXISTS
OPERATION FAILED
SCSI DRV NOT RDY
TRACKS FULL
BUFFER FULL
MEMORY FULL
CANNOT FIND LOOP
Installed SIMM configuration is not supported.
Tried to create more than 128 volumes on a single SCSI
partition. (Maximum is 128 volumes per partition.)
No disk present in floppy drive or in removable-disk
SCSI drive; or SCSI drive's power is off.
Disk is not formatted, or format is not recognized by the
SU700.
Disk not formatted for use with the SU700.
SU700 unable to access disk.
Disk's write protection tab is switched on.
Unable to write to disk.
Disk has no remaining free capacity.
Sample is too large to fit on floppy disk. (Occurs only
when attempting to export a sample.)
Volume not present on disk.
Specified file not found on disk.
File type not recognized by SU700.
File is corrupted.
Attempted to assign a name that is already in use.
Attempted operation failed.
SCSI drive not ready to be accessed.
All sample tracks contain samples. (No empty sample
tracks remaining.)
MIDI receive buffer is full. (SU700 received more MIDI
data than it can handle.)
No more available sequence memory or sampling
memory.
Recorded sample is too long or too short for loop genera-
tion.
Error Messages 331