Displaying The Sirius Satellite Radio™ Information - Yamaha DVX-700 Owner's Manual

Yamaha dvd home theater system owner's manual
Hide thumbs Also See for DVX-700:
Table of Contents

Advertisement

Tuning into the locked channels
You can tune into the locked channels by the Direct
number access mode or preset tuning mode. When you
tune into the locked channel, following message appears
in the front panel display. Enter the code number you set
for the parental lock feature by using Numeric keypad
0-9.
P I N : _ _ _ _
Notes
– Enter each code number within 10 seconds.
– If the entered code number is incorrect, "Wrong"
appears in the front panel display.
– To cancel the tuning, press LOCK.
■ Displaying the SIRIUS Satellite
Radio™ information
You can display the SIRIUS Satellite Radio information
(such as channel number, channel name, category, artist
name, composer name, or song title) for the currently
selected channel in the front panel display.
TOP MENU
PRESET/CH
INFO.
A-E/CAT.
ENTER
SETUP
Note
If a status message or an error message appears in the
front panel display, refer to the "SIRIUS Satellite
Radio" section in "Troubleshooting" on page 69 for
appropriate remedies.
Displaying the SIRIUS Satellite Radio
information in the front panel display
Press INFO. repeatedly to toggle between the following
SIRIUS Satellite Radio information display modes.
MENU
A-E/CAT.
RETURN
CODE SET
LISTENING TO SIRIUS SATELLITE RADIO™ BROADCASTS
CHANNEL INFO
e.g.) 008 Big '80s
Channel number/name
CATEGORY INFO
e.g.) Pop
Channel category
SONG INFO
e.g.) Sanumemo / Roa
Artist name / Song title
COMPOSER INFO
e.g.) Frankie Zipper
Composer name
ANTENNA INFO
e.g.) 043 ANT:
Channel number/Antenna reception level
DSP PROG. INFO
e.g.) STEREO
Sound field program
Back to "CHANNEL INFO"
Hints
– The front panel display can indicate up to 14
alphanumeric characters at once. If the information
contains more than 14 alphanumeric characters, it
starts scrolling.
– If the SIRIUS Satellite Radio information contains
a character that cannot be recognized by the
system, the character will be displayed with a
space.
– To hold the current SIRIUS Satellite Radio
information, press ENTER on the remote control
while it is being displayed. The HOLD indicator
flashes in the front panel display while you are
holding the SIRIUS Satellite Radio information.
Press ENTER again to release the held
information.
– When the antenna of the SiriusConnect tuner
cannot receive the signals, "ACQUIRING" appears
in the front panel display.
– When an information is unavailable, "----" appears.
6
-
59
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents