Yamaha AV-S7 Owner's Manual page 25

USING THE AV-S7
OFF
DSP
TEST
INPUT
3
1/2
AMP
POWER
1
Press the PROGRAM selector button on the center
speaker to select the programs shown below.
PRO LOGIC ENHANCED
PRO LOGIC
CONCERT
SPORTS
MONO MOVIE
OFF
ENHANCED
A
PROLOGIC CONCERT 6
B C
SPORTS MONO MOVIE
E
D
CENTER
REAR
SUBWOOFER
VOLUME
5
2
Listening to a source with sound
effects by digital sound field
processing (including Dolby Pro
Logic Surround decoding)
1
Press the POWER button.
When the system is turned on, the STANDBY
indicator turns off, and INPUT indicator 1 or 2 lights
up.
2
Press the VOLUME "–" button to lower the volume.
3
Use the INPUT selector button to select the listening
source.
INPUT 1: For playing a TV or VCR
INPUT 2: For playing audio signals from a
CD player or MD player connected to
INPUT 2
4
Play the source.
5
Press the VOLUME "+" button to adjust the volume
to the desired level.
6
Use the PROGRAM selector button to select the
DSP program (A, B, C, D, or E) matching the play
source.
* The PROGRAM selector button on the center
speaker cycles through
A B C D E OFF A when pressed.
* Check the program settings at the PROGRAM
indicator.
7
The volume for all speakers can be adjusted
simultaneously with the VOLUME button.
Notes
Program selection can be made for individual input
sources. Once you select a program, it is linked with
the input source selected at that time. So, when you
select the input source next time, the same program
is automatically called.
If you prefer to cancel the DSP, press the DSP OFF
button. The sound will be the normal 2-channel
stereo without the surround sound effect.
When CONCERT, SPORTS or MONO MOVIE is
selected, no sound is heard from the center
speaker.
When a monaural sound source is played with
DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED, sound is heard from the center
speaker and subwoofer.
If the AV-S7 system is set to STANDBY or turned
off, the signal applied to INPUT 1 is sent to the
THROUGH terminals of INPUT 1.
E-21