Connections - Yamaha AV-S7 Owner's Manual

CONNECTIONS

CONNECTIONS
When you have finished placing or installing all units in this system, begin making connections by following the
instructions in this section.
This system requires three connections: system connection, speaker connection and AC supply connection.
However, the order of these connections is not important.
Never plug the AC supply lead of this system into the outlet until all connections are
completed.
Making a system connection between the center speaker (NX-AVS7) and the
power amplifier/subwoofer (SW-AVS7)
1
Connect the SYSTEM CONNECTOR terminals on
both units with each other using the provided system
connector cable.
* When connecting the system connector cable to
both terminals, note the directions of each
SYSTEM CONNECTOR terminal's face.
2
Connect the AUDIO OUTPUT terminals on the TV to
the INPUT1 terminals on the SW-AVS7 using the
provided connection cord.
* Be sure to connect the red plug of the connection
cord to the "R" (right) terminal and the white plug
to the "L" (left) terminal.
Connection to a TV with an AUDIO OUT terminal
Center speaker
(NX-AVS7)
SYSTEM
CONNECTOR
MARK
TV
Set the volume control of the
TV to the minimum setting.
VCR
System connector cable (provided)
SYSTEM
CONNECTOR
MARK
System
connector
VIDEO AUDIO AUDIO
INPUT INPUT OUTPUT
L
R
Audio connection
*1 *2
cord (provided)
L
CD or MD
R
player
VIDEO AUDIO
OUTPUT OUTPUT
E-12
3
Connect the INPUT 2 terminals to the AUDIO output
terminals of a CD, MD, laser disc player or DVD
player.
Caution
Be careful not to damage the system connector
cable by placing something heavy on the cable,
putting metal fittings on the cable, or tugging the
cable. Damaging the cable may cause the system
to break down.
L
R
MARK
1 2
THROUGH
SYSTEM
CONNECTOR
INPUT
*3
L
R
AUDIO
OUTPUT
*1 : Video connection cable (optional)
*2,3 : Audio connection cable (optional)
Power amplifier/subwoofer
(SW-AVS7)
L
R
MARK
1 THROUGH 2
R L R L
SYSTEM
INPUT CONNECTOR FRONT FRONT