Yamaha AV-S7 Owner's Manual page 18

CONNECTIONS
Connecting the speakers to the power amplifier/subwoofer (SW-AVS7)
Power amplifier/subwoofer
(SW-AVS7)
Connecting the AC supply lead
• After completing all connections, plug the AC supply
lead into a convenient outlet.
VOLTAGE SELECTOR
For General and China models only
The voltage selector on the bottom of the power
amplifier/subwoofer (SW-AVS7) must be set for
your local main voltage BEFORE plugging it into
the AC main supply.
Voltages are 110/120/220/240V AC, 50/60 Hz.
Right front
speaker
L
R
MARK
1 2
THROUGH
R L R L
SYSTEM
INPUT CONNECTOR FRONT REAR
VOLTAGE
SELECTOR
To outlet
Left front Right rear
speaker speaker
R L R L
FRONT REAR
• Unplug the AC supply lead from the outlet if this
system is not to be used for a long period of time.
L
R
MARK
1 2
THROUGH
R L R L
SYSTEM
CONNECTOR
INPUT FRONT REAR
E-14
Left rear
speaker
MAIN POWER switch
For U.K. and Europe
models only
Setting this to ON switches
the AV-S7 system to
STANDBY mode. To start
the system, press the
STANDBY/ON button on the
center speaker or the
POWER button on the
remote control transmitter.