Standby Mode - Yamaha AV-S7 Owner's Manual

TURNING 0N THE POWER TO THIS SYSTEM OR SETTING IT TO THE STANDBY MODE
TURNING ON THE POWER TO THIS SYSTEM OR SETTING IT TO THE STANDBY MODE
INPUT STANDBY/ON
INPUT
POWER
PROGRAM
ENHANCED
A
OFF
PROLOGIC CONCERT
B C
SPORTS MONO MOVIE
E
D
DSP
CENTER
TEST
REAR
SUBWOOFER
1/2
AMP
VOLUME
If the AC supply lead is connected to an outlet, this
system can be turned on or switched to the standby
mode by pressing the STANDBY/ON button on the
front panel of the center speaker or the POWER button
on the remote control transmitter.

Standby mode

While the power is on, pressing the STANDBY/ON
button (or the POWER button on the remote control
transmitter) switches the system to standby mode.
In this mode, the main voltage still flows through the
system. If you want to turn off the system
completely, remove the AC power plug from the
outlet.
Note: When the power is turned on by pressing the
STANDBY/ON button (or the POWER button on
the remote control transmitter), the volume
indicator flashes and no sound is emitted from the
speakers for several seconds.
E-18