Controls And Their Functions - Yamaha AV-S7 Owner's Manual

CONTROLS AND THEIR FUNCTIONS

CONTROLS AND THEIR FUNCTIONS
CENTER SPEAKER (WITH CONTROL UNIT)
1
INPUT selector button
This button switches between INPUT 1 and INPUT 2
each time it is pressed. Check the INPUT 1/2 indicator
5 to see which is in use.
2
STANDBY/ON (Switch) button
This button switches between power-on and standby
each time it is pressed.
When standby mode is activated, the STANDBY
indicator 4 lights up.
When the power-on is activated, the STANDBY
indicator 4 is off. You can tell that the power is on since
the INPUT 1/2 indicator 5 and other indicators are lit
up.
Standby mode
In this state, this unit consumes a very small
quantity of power to receive infrared signals from
the remote control transmitter.
3
PROGRAM selector button
This button is used for selecting the DSP program. The
selections cycle through A B C D E OFF A
when pressed.
A: Dolby Pro Logic Enhanced
B: Dolby Pro Logic
C: Concert
1 2
INPUT STANDBY/ON
Remote control
1 2
sensor
VOLUME
STANDBY
L
INPUT 1
INPUT 2
REAR
5 6
4
E-16
3
PROGRAM
3
C R E
D
C
B
A
7
D: Sports
E: Mono Movie
Check the PROGRAM indicator 7 when making the
selection.
4
STANDBY indicator
This indicator lights up when in standby mode.
5
INPUT 1/2 indicators
These indicators light up to show whether INPUT 1 or 2
is selected.
6
VOLUME indicators
These indicators light up according to the setting of the
VOLUME buttons 9 on the remote control transmitter.
7
PROGRAM indicators
These indicators light up to show the selected DSP
program.
Remote control sensor
The sensor is a window for receiving the signal from the
remote control transmitter.