Yamaha AV-S7 Owner's Manual page 21

CONTROLS AND THEIR FUNCTIONS
REMOTE CONTROL TRANSMITTER
1
POWER button
This button turns on the power to this system and
switches this system to standby mode alternately.
2
INPUT selector button
This button switches between INPUT 1 and INPUT 2
each time it is pressed. Check the INPUT 1/2 indicator
5 of the center speaker to see which is activated.
3
TEST button
This button is used for speaker balance adjustment.
(For details, refer to page 19.)
4
DSP OFF button
This button switches off the digital sound field
processor (including the Dolby Pro Logic Surround
decoder).
5
PROGRAM selector buttons
These buttons are used for selecting the DSP program.
A: Dolby Pro Logic Enhanced
B: Dolby Pro Logic
ENHANCED
4 4 4
A
OFF
PROLOGIC CONCERT
B C
SPORTS MONO MOVIE
D
DSP
CENTER
3
TEST
REAR
INPUT SUBWOOFER
2
1/2
AMP
VOLUME
POWER
1
Check the PROGRAM indicators 7 of the center
speaker when making the selection.
6
Pressing the "+" button raises and pressing the "–"
button lowers the volume level of the center speaker.
7
Pressing the "+" button raises and pressing the "–"
button lowers the volume level of the rear speakers.
8
Pressing the "+" button raises and pressing the "–"
button lowers the volume level of the subwoofer.
9
Pressing the "+" button raises and pressing the "–"
button lowers the volume of the whole system.
E-17
5
E
6
7
8
9
C: Concert
D: Sports
E: Mono Movie
CENTER level (+/–) buttons
REAR level (+/–) buttons
SUBWOOFER level (+/–) buttons
VOLUME (+/–) buttons