Ricoh Ri 1000 Operator Training page 65

Platen Size: This needs to be set to the
table size you are using. The standard table
is Medium 12.6" x 18". You may also select
the Sleeve, Youth or Small Print adapter
sizes if you have these table attachments
installed.
Quality Mode: You can select from 3
modes:
•Speed (not recommended for solid
colors),
•Fine (recommended & default mode)
•Superfine (Must change inkset to use
this mode).
**Not Yet Available in AnaRip 5.2 will
be added soon
These modes change the number of lines it
takes to print an image. The higher the
mode the mores lines are use to print it.
Note, the more lines the longer it will take
to print. Also, this setting does not affect
the amount of ink used.
Printing From the RIP
AnaJet Ricoh _ Ri 1000- Operator Training
Print Settings Tab
65