Ricoh Ri 1000 Operator Training page 15

Heat Press Equipment
• All garment inks are required to reach a certain temperature and time to be
properly cured, if this temperature or time is not properly adjusted on your heat
press you risk the possibility of the shirt washing out during the wash cycle. Keep
Heat Press at least 10'ft from printer.
• Heat Press Setting: White or light shirts using only CMYK: 356˚F (180˚C) for 100
seconds
•
Anything using white ink: 330˚F (165˚C) for 90 seconds.
• All prints can be run at this longer/colder setting if you are alternating from light
to dark.
• Pressure – Pressure should be set to a Medium to medium –high settings. If not
enough pressure is applied the ink will not cure and will wash out. 40-50 PSI (6
boxes on the GeoKnight)
•
AnaJet Ricoh _ Ri 1000- Operator Training 15