Name That Song - Yamaha RY20 Owner's Manual

Name that Song

This mode allows you to assign a name of up to five characters to a
song.
Press the [ SONG ] button to put the RY20 into Song Mode. Select a song by
1
rotating the Jog Dial or using the [ +1 ] and [ –1 ] buttons.
Select the Name display page by pressing the [PAGE+] button until the
2
display reads "NAME" and shows the name of the current song. Notice that
the first character is flashing.
OTHERS
HH
SD
BD
The default name for all songs is "-----".
Select the first character of the name by rotating the Jog Dial or by using
3
the [ +1 ] and [ –1 ] buttons.
NOTE
The RY20 contains the following character set, allowing you to use numbers, upper
and lower case letters and symbols for your name.
(Space)
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX
YZ[¥]^_'abcdefghijklmnopqrstuvwxyz{|}
To move to the next character, press the [ > ] button. The second character
4
will flash. Change that character by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
Repeat the previous step until you have finished creating the name for
5
your song.
SONG
PAD BANK A CHASE
SONG
MAIN A
Playing the Songs
81