Clearing A Pattern - Yamaha RY20 Owner's Manual

Modify the value by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
6
buttons.
The default level is "00". The range is from "–99" to "99". The level value
controls how much the volume will be changed from its recorded value. As
the level is reduced, the volume of all the notes on the track is
correspondingly lowered. When you raise the level, the volumes are
correspondingly increased.
Select the next track you wish to modify with the Track Select/Mute
7
buttons.
PATTERN
OTHERS
HH
SD
BD
Repeat the above steps.
NOTE
You can reset each parameter to its default setting by pressing the
buttons simultaneously.

Clearing a Pattern

Clearing data from a user/combination pattern is a flexible operation.
You can clear individual tracks or an entire section.
Press the [PATTERN] button to put the RY20 into Pattern Mode. Select a
1
pattern by rotating the Jog Dial or using the [ +1 ] and [ –1 ] buttons.
Select the Clear display page by pressing the
2
display indicates "CLEAR SURE?".
PATTERN
OTHERS
HH
SD
BD
PAD BANK A CHASE
DELETE
PAD BANK A CHASE
PATTERN
MAIN A
Other Pattern Functions
[ +1 ] [ –1 ]
and
[ CLEAR ] button. The
DELETE CLEAR
55