Changing The Song Name; Punch-In Recording - Yamaha Motif DDK-7 Owner's Manual

Punch-in Recording

This lets you re-record a specific phrase or section which you don't want to use, either
that of a specific part(s) or all parts.
Select the song which contains the phrase you want to change.
1
For details on selecting a song, see page 104.
2
Press the [F] (Play) button to start playback of the song.
Press the [K] (Pause) button at the point you want to execute
3
punch-in recording.
Press the [RECORD] button.
4
The recording display appears, indicating that the Music Data Recorder is ready
to record.
Set the parts which you want to change to "REC" status and
5
other parts to "PLAY."
Press the [F] (Play) button to start punch-in recording. Play the
6
new phrase, as you want it to be changed.
Press the [J] (Stop) button to quit the punch-in recording as
7
soon as you reach the end of the phrase.
5

Changing the Song Name

You can name the song, such as giving it a title or indicating the date on which it was
recorded. However, song names of the EL-series Electone, such as the EL-900, cannot
be changed.
Select the song whose name you want to change.
1
For details on selecting a song, see page 104.
Press the [TOOLS] button at the top right of the display to call up
2
the TOOLS Page.
NOTE
This function is best used
when the phrase to be
re-recorded has definite
beginning and end points,
with slight pauses before and
after.
NOTE
When you change the name
of an XG song, the extension
(.mid) cannot be changed.
DDK-7 Owner's Manual 113
7