Feedback Gain - Yamaha RY20 Owner's Manual

Feedback Gain

This setting affects the amount of delay signal being fed back to the
DSP. The higher the value you select, the greater the number of
delayed repeats is produced.
Select the Feedback Gain display page by pressing the [ PAGE+ ] or
1
[ PAGE– ] button. The current level flashes under the "F.GAIN" prompt.
PATTERN
OTHERS
HH
SD
BD
NOTE
Feedback gain can only be applied to the delay effects. When the reverberation
effects are selected, " --
Set the feedback gain by rotating the Jog Dial or by using the
2
[ +1 ] and [ –1 ] buttons. The range is from "00" to "31".
NOTE
You can change the Feedback Gain for the preset drum kits. Your altered setting
will stay in effect until you select another drum kit.
EFFECT
PAD BANK A CHASE
DRUM KIT
MAIN A
" is displayed.
Changing the Effects
PAGE – PAGE +
107