Changing The Effects; Enabling Effects - Yamaha RY20 Owner's Manual

Changing the Effects

10
Changing the Effects
EFFECT
+
–1 +1
102
The RY20 contains a built-in DSP that is capable of a wide variety of
reverb and delay effects.

Enabling Effects

If you have a rack of reverbs, delays, and other effects devices, you
may want to use just the drum sounds of the RY20. The first display
page of the Effect Mode allows you to quickly and conveniently bypass
the DSP effects, switching from a "wet" sound to a "dry" sound.
Put the RY20 in Effect Mode by pressing the [EFFECT] button. Notice that
1
the "EFFECT" indicator is switched on as is the "EFFECT" prompt and that
the current setting is flashing.
PATTERN
OTHERS
NOTE
From the initial display page of the Effect Mode, pressing the
switch the RY20 back to the previously selected main mode, such as Pattern or Song
Play Mode or one of the recording modes.
From the other display pages of the Effect Mode, pressing the
switch to the initial display page of the mode.
Switch from effect "ON" to effect "BYPAS" (bypass) by rotating the Jog Dial
2
or by using the [ +1 ] and [ –1 ] buttons.
The RY20 is shipped with the Effect Mode "ON". This setting applies to all
the Drum Kits.
EFFECT
PAD BANK A
HH
SD
BD
MAIN A
CHASE
[EFFECT]
[EFFECT]
button will
button will