MIDI Functions
PAGE –
PAGE +
116
Volume and Expression
MIDI Volume
The volume setting is used to control the volume level of the
individual MIDI channels: Drum and Bass.
Select the Volume display page by pressing the [PAGE+] or [PAGE–] button.
1
The current instrument flashes below the "VOLUME" prompt.
PATTERN
OTHERS
Select the instrument "DR" (drums) or "BS" (bass) by rotating the Jog Dial
2
or by using the [ +1 ] and [ –1 ] buttons.
Change the focus area to the volume data by pressing the [ > ] cursor
3
button.
Change the volume by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]
4
buttons.
The default is "127". The range is "000" to "127".
NOTE
The volume setting affects the sounds produced by tapping the drum pads, or note
events from the internal sequencer or an external MIDI device.
MIDI
PAD BANK
A
HH
SD
BD
MAIN A
CHASE