Stihl Al 1 Charger Conformity Notice; General Power Tool Safety Warnings; Introduction; Work Area Safety - Stihl HSA 26 Instruction Manual

English
– Serial identification: HA03
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and
has been developed and manufactured in compliance with
the following standards in the versions valid on the date of
production: EN 55014-1, EN 55014-2, EN 60745-1,
EN 60745-2-15, EN 60335-1 and EN 50636-2-94.
Applied conformity assessment procedure in accordance
with Directive 2000/14/EC, Annex V.
– Measured sound power level: 80 dB(A)
– Guaranteed sound power level: 82 dB(A)
Technical documents are deposited at ANDREAS STIHL AG
& Co. KG, Produktzulassung (Product Licensing).
The year of manufacture, country of manufacture and serial
number are applied to the shrub shears.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
Dr. Jürgen Hoffmann, Head of Product Data, Regulations
and Licensing

22.2 STIHL AL 1 Charger Conformity Notice

This charger has been manufactured and put on the market
in accordance with the following directives: 2014/35/EU,
2014/30/EU and 2011/65/EU.
The year of manufacture, country of manufacture and serial
number are applied to the charger.
The complete EC Declaration of Conformity is available from
ANDREAS STIHL AG & Co. KG, Badstrasse 115,
71336 Waiblingen, Germany.
60

23 General Power Tool Safety Warnings

23 General Power Tool Safety Warnings

23.1 Introduction

This chapter reproduces the pre-formulated, general safety
precautions specified in the IEC 62841 standard for hand-
held motor-operated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric
shock given under "Electrical Safety" do not apply to STIHL
cordless products.
WARNING
Read all the safety precautions, instructions, illustrations
and specifications accompanying this electric power tool.
Failure to follow the safety warnings and instructions may
result in electric shock, fire and/or serious injury. Save all
safety warnings and instructions for future reference.
The term "electric power tool" in the safety warnings refers
to mains-operated (corded) power tools or battery-operated
(cordless) power tools.

23.2 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
0458-601-9621-A