Removing The Battery; Switching The Shrub Shears On/Off; Switching On; Switching Off - Stihl HSA 26 Instruction Manual

English
8.2

Removing the Battery

1
► Depress both locking hooks (1).
The battery (2) is unlocked and can be removed.

9 Switching the Shrub Shears On/Off

9.1

Switching On

1
► Push the release slide (1) in the direction of the cutting
blades with your thumb and hold it there.
► Pull the trigger (2) with your index finger and hold it there.
You can let go of the release slide (1). The motor
accelerates and the cutting blades run.
9.2

Switching Off

► Let go of the trigger and release slide.
50
2
2
9 Switching the Shrub Shears On/Off
► Wait until the cutting blades come to a complete standstill
after about 1 second.
► If the cutting blades continue to run after about 1 second:
Remove the battery and contact your STIHL servicing
dealer.
There is a malfunction in the shrub shears.
10 Checking the Shrub Shears and
Battery

10.1 Checking the Controls

Release slide and trigger
► Remove the battery.
► Attempt to pull the trigger lever without depressing the
release slide.
► If the trigger can be pulled: Do not use your shrub shears
and contact your STIHL servicing dealer.
The release slide has a malfunction.
► Push the release slide in the direction of the cutting blades
with your thumb and hold it there.
► Pull the trigger.
► Let go of the trigger and release slide.
► If the trigger or the release slide is stiff or does not spring
back to the idle position: Do not use your shrub shears and
contact your STIHL servicing dealer.
The trigger or release slide has a malfunction.
Switch on the shrub shears
► Fit the battery.
► Push the release slide in the direction of the cutting blades
with your thumb and hold it there.
► Pull the trigger and hold it there.
The cutting blades run.
► Release the trigger.
The cutting blades stop running after about 1 second.
0458-601-9621-A